Setting up networks for backup storage

Prerequisites

• Your network topology meets the requirements listed in Requirements for backup storage.
• A clear understanding of the concept Traffic types.

For the Backup Gateway, the recommended network configuration includes two networks, for internal and external traffic. You can leave the default Public and Private networks as they are. In this case, traffic types should be assigned to these networks, according to the following table:

Recommended network setup for Backup Gateway

Network	Traffic types
Private	Storage, Internal management, OSTOR private, ABGW private
Public	Admin panel, SSH, S3 public, iSCSI, NFS, ABGW public

To create the network configuration for backup storage

1. Review your network configuration on the Infrastructure > Networks screen.
2. If you plan to use RDMA over InfiniBand, move the traffic type Storage to a dedicated network and assign that network to the IB interface.
3. Configure network interfaces on the nodes that you plan to join the backup storage and connect the interfaces to your networks.