Setting up a PXE server

You will need to install and configure the following components:

  • TFTP server. This is a machine that allows your servers to boot and install Acronis Cyber Infrastructure over the network. Any machine that can run Linux and is accessible over network can be a TFTP server.
  • DHCP server. This is a standard DHCP machine serving TCP/IP settings to computers on your network.
  • HTTP server. This is a machine serving Acronis Cyber Infrastructure installation files over a network.

    You can also share Acronis Cyber Infrastructure distribution over a network via FTP (for example, with vsftpd) or NFS.

To install PXE components

Run the following command:

# yum install tftp-server syslinux httpd dhcp

You can also use servers that already exist in your infrastructure. For example, skip httpd and dhcp if you already have the HTTP and DHCP servers.

To set up the TFTP server

Follow this instruction to configure the TFTP server for BIOS-based systems. For information on configuring it for EFI-based systems, refer to the Red Hat Enterprise Linux Installation Guide.
  1. On the server, open the /etc/xinetd.d/tftp file, and edit it as follows:

    service tftp
    {
    disable = no
    socket_type = dgram
    protocol = udp
    wait = yes
    user = root
    server = /usr/sbin/in.tftpd
    server_args = -v -s /tftpboot
    per_source = 11
    cps = 100 2
    flags = IPv4
    }

    Once you are done, save the file.

  2. Create the /tftpboot directory and copy the following files to it: vmlinuz, initrd.img, menu.c32, pxelinux.0.

    These files are necessary to start installation. You can find the first two in the /images/pxeboot directory of the Acronis Cyber Infrastructure distribution. The last two files are located in the syslinux directory (usually /usr/share/syslinux or /usr/lib/syslinux).

  3. Create the /tftpboot/pxelinux.cfg directory and make the default file in it.

    # mkdir /tftpboot/pxelinux.cfg
    # touch /tftpboot/pxelinux.cfg/default
  4. Add the following lines to default:

    default menu.c32
    prompt 0
    timeout 100
    ontimeout INSTALL
    menu title Boot Menu
    label INSTALL
    menu label Install
    kernel vmlinuz
    append initrd=initrd.img ip=dhcp

    For detailed information on parameters you can specify in this file, refer to the documentation for syslinux.

  5. Restart the xinetd service:

    # /etc/init.d/xinetd restart
    
  6. If necessary, configure the firewall to allow access to the TFTP server (on port 69 by default).

    When running the TFTP server, you might get the “Permission denied” error. In this case, you may try to fix the problem by running the following command: # restorecon -Rv /tftboot/.

To set up the DHCP server

Add the following strings to the dhcpd.conf file, which is usually located in the /etc or /etc/dhcp directory:

next-server <PXE_server_IP_address>;
filename "/pxelinux.0";

To configure a DHCP server for installation on EFI-based systems, specify filename "/bootx64.efi" instead of filename "/pxelinux.0" in the dhcpd.conf file, where /bootx64.efi is the directory to which you copied the EFI boot images when setting up the TFTP server.

To make the distribution files available on the HTTP server

  1. Set up an HTTP server (or configure the one you already have).
  2. Copy the contents of the distribution image to a directory on the HTTP server (for example, /var/www/html/distrib).
  3. On the PXE server, specify the path to the installation files in the append line of the /tftpboot/pxelinux.cfg/default file.

    For EFI-based systems, the file you need to edit has the name of /tftpboot/pxelinux.cfg/efidefault or /tftpboot/pxelinux.cfg/<PXE_server_IP_address>.

    Assuming that the HTTP server is at 198.123.123.198, the installation files are in /var/www/html/distrib/, and DocumentRoot is set to /var/www/html, the default file may look like this:

    default menu.c32
    prompt 0
    timeout 100
    ontimeout INSTALL
    menu title Boot Menu
    label INSTALL
    menu label Install
    kernel vmlinuz
    append initrd=initrd.img ip=dhcp inst.repo=http://198.123.123.198/distrib