6.6. Monitoring Event Logs

You can use the vstorage -c <cluster_name> top utility to monitor significant events happening in the storage cluster. For example:

../_images/image029.png

The command above shows the latest events in the stor1 cluster. The information on events (highlighted in red) is given in a table with the following columns:

TIME
Time of event.
SYS
Component of the cluster where the event happened (e.g., MDS for an MDS server or JRN for local journal).
SEV
Event severity.
MESSAGE
Event description.

The following table lists basic events displayed when you run the vstorage top utility.

Table 6.6.1 Basic events
Event Severity Description
MDS#<N> (<addr>:<port>) lags behind for more than 1000 rounds JRN err

Generated by the MDS master server when it detects that MDS#<N> is stale.

This message may indicate that some MDS server is very slow and lags behind.

MDS#<N> (<addr>:<port>) didn’t accept commits for M sec JRN err

Generated by the MDS master server if MDS#<N> did not accept commits for M seconds. MDS#<N> gets marked as stale.

This message may indicate that the MDS service on MDS#<N> is experiencing a problem. The problem may be critical and should be resolved as soon as possible.

MDS#<N> (<addr>:<port>) state is outdated and will do a full resync JRN err

Generated by the MDS master server when MDS#<N> will do a full resync. MDS#<N> gets marked as stale.

This message may indicate that some MDS server was too slow or disconnected for such a long time that it is not really managing the state of metadata and has to be resynchronized. The problem may be critical and should be resolved as soon as possible.

MDS#<N> at <addr>:<port> became master JRN info

Generated every time a new MDS master server is elected in the cluster.

Frequent changes of MDS masters may indicate poor network connectivity and may affect the cluster operation.

The cluster is healthy with N active CS MDS info

Generated when the cluster status changes to healthy or when a new MDS master server is elected.

This message indicates that all chunk servers in the cluster are active and the number of replicas meets the set cluster requirements.

The cluster is degraded with N active, M inactive, K offline CS MDS warn

Generated when the cluster status changes to degraded or when a new MDS master server is elected.

This message indicates that some chunk servers in the cluster are

  • inactive, i.e. do not send any registration messages, or
  • offline, i.e. have been inactive for longer than mds.wd.offline_tout, which is 5 min by default.
The cluster failed with N active, M inactive, K offline CS (mds.wd.max_offline_cs=<n>) MDS err

Generated when the cluster status changes to failed or when a new MDS master server is elected.

This message indicates that the number of offline chunk servers exceeds mds.wd.max_offline_cs, which is 2 by default. When the cluster fails, the automatic replication is not scheduled any more. So the cluster administrator must take action to either repair failed chunk servers or increase mds.wd.max_offline_cs. Setting this value to 0 disables the failed mode completely.

The cluster is filled up to <N>% MDS info/warn

Shows the current space usage in the cluster. A warning is generated if the disk space consumption equals or exceeds 80%.

It is important to have spare disk space for data replicas if one of the chunk servers fails.

Replication started, N chunks are queued MDS info Generated when the cluster starts automatic data replication to recover the missing replicas.
Replication completed MDS info Generated when the cluster finishes automatic data replication.
CS#<N> has reported hard error on path MDS warn

Generated when the chunk server CS#<N> detects disk data corruption.

You are recommended to check the hardware for errors and replace corrupted disks as soon as possible.

CS#<N> has not registered during the last T sec and is marked as inactive/offline MDS warn Generated when the chunk server CS#<N> has been unavailable for a while. In this case, the chunk server first gets marked as inactive. After 5 minutes, the state is changed to offline, which starts automatic replication of data to restore the replicas that were stored on the offline chunk server.
Failed to allocate N replicas for ‘path’ by request from <addr>:<port> - K out of M chunks servers are available MDS warn Generated when the cluster cannot allocate chunk replicas, for example, when it runs out of disk space.
Failed to allocate N replicas for ‘path’ by request from <addr>:<port> since only K chunk servers are registered MDS warn Generated when the cluster cannot allocate chunk replicas because not enough chunk servers are registered in the cluster.