.. _Connecting Remote iSCSI Devices to Storage Cluster Nodes:

Connecting Remote iSCSI Devices to Storage Cluster Nodes
--------------------------------------------------------

|product_name| allows you to connect remote iSCSI devices to nodes and perceives their LUNs as storage disks. You can connect iSCSI devices to nodes at any time.

To connect a remote iSCSI device to a node, do the following:

#. On the **INFRASTRUCTURE** > **Nodes** screen, select a node, open its **DISKS** tab, and click **iSCSI target**.

   .. only:: ac

      .. image:: /images/stor_image1_14_1_ac.png
         :align: center
         :class: align-center

   .. only:: vz

      .. image:: /images/stor_image1_14_1_vz.png
         :align: center
         :class: align-center

#. In the **Remote iSCSI Target** window, do the following:

   #. Specify the IQN of the target.

   #. In the **Portal** and **Port** fields, specify the target's IP address and port (optional) and click the check icon.

   #. (Optional) If the target has multiple paths, click **Add portal** and configure it as in the previous step.

   #. (Optional) If necessary, check **CHAP authentication** and specify the credentials.

   #. Click **Connect**.

|product_name| will connect the target (i.e. all its LUNs) and initiate it. Devices of the **iSCSI** type will appear in the node's **DISKS** list.

To remove the iSCSI target, click **iSCSI Target**, **DELETE CONNECTION**, and **DELETE**.

.. _Assigning Disk Roles To Remote iSCSI Devices:

Assigning Disk Roles To Remote iSCSI Devices
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the node had already been in the cluster before you connected the iSCSI device to it, assign disk roles to all its LUNs. To do this:

#. Select a disk with the **iSCSI** type and click **Assign**.

#. In the **Choose role** window, select **Storage** and click **Done**.

#. Repeat the above steps for every disk with the **iSCSI** type.

Even though you can assign **Metadata** or **Cache** roles to such disks, it is recommended only for single-node ABGW installations with SAN-provided redundancy. For more information on disk roles, see :ref:`Assigning Disk Roles Manually`.